TNR Roofing Services
Rolls of black rubber membrane laid out across a new flat roof, Borehamwood
EPDM rubber roofing ยท Borehamwood

EPDM Rubber Roofing in Borehamwood

EPDM rubber roofs laid in one sheet or repaired across WD6, for homes and commercial properties, following a free roof survey.

Get a Free Quote 020 8419 8580

Request a Free Quote

Start with your name and number. It takes under a minute.

  • Free Roof Surveys
  • 24/7 Emergency Response
  • Fully Insured
  • Herts, Hants & Surrey

EPDM Rubber Roofing in Borehamwood

Single-Sheet EPDM Rubber Roofing in Borehamwood

A flat roof that keeps letting in water around its joins is a good candidate for EPDM. The rubber membrane covers the roof in a single sheet, is bonded fully to the deck and turns up at the walls, which takes away the seams where leaks usually begin. TNR Roofing Services fits EPDM on homes and commercial properties in Borehamwood and repairs existing rubber roofs too.

EPDM installs in Borehamwood and across WD6 are handled from our Hemel Hempstead base. At the free survey we look at the deck as well as the covering, because a membrane is only as sound as the boards it is bonded to, and any deck repairs are priced into the quote from the start.

Get a Free Quote Call 020 8419 8580
Roofer rolling down the seam of a black rubber membrane

Reviews

Reviews from Customers across Hertfordshire

What homeowners and businesses say about TNR Roofing Services, roofers covering Borehamwood and the rest of Hertfordshire.

Read Our Reviews on Google
New black rubber flat roof with a roof light on an extension

What's included

Our EPDM Rubber Roofing Services in Borehamwood

The main parts of the job, each listed in your quote.

  • Flat roofs covered with a single EPDM rubber sheet, so there are no joins across the main area for water to find.
  • The membrane fully bonded with adhesive to a clean timber deck, new or repaired, so wind cannot lift it.
  • Upstands and corners formed at walls, with the rubber turned up to seal each junction.
  • Edge trims and gutter drip details fitted to hold the membrane securely and guide water off the roof.
  • Punctures, small tears and lifted edges on existing EPDM roofs repaired with compatible rubber patches and adhesive.
  • Larger commercial flat roofs re-covered in wide EPDM sheets that keep the number of seams to a minimum.
Get a Free Quote Call 020 8419 8580
More about our epdm rubber roofing service

Free EPDM Rubber Roofing Quotes in Borehamwood

Free, no-obligation quotes for EPDM rubber roofing in Borehamwood and across Hertfordshire.

Get a Free Quote 020 8419 8580

Pricing

Pricing an EPDM Rubber Roof in Borehamwood

The price of EPDM work in Borehamwood comes down to the following, each assessed on site:

  • The roof area and whether one EPDM sheet will cover it or a joined seam is needed
  • The condition of the existing deck and any boards to replace before the membrane is bonded
  • How many upstands, corners, pipes and roof lights the rubber has to be sealed around
  • The length and style of edge trims and gutter drip details required
  • Stripping the old covering and the access needed to reach the roof
New black rubber flat roof on a rear house extension

How it works

Our EPDM Installation Steps in Borehamwood

What happens from your first call to the finished work.

  1. Free Survey and Measuring

    We measure the roof to size the EPDM sheet and check the deck for rot, movement or damp, so the membrane, trims and adhesive in your quote match the real job.

  2. Stripping and Deck Preparation

    The old covering comes off, any damaged boards are replaced and the deck is swept clean, because the adhesive needs a dry, dust-free surface to bond to.

  3. Laying and Bonding the Rubber

    The sheet is unrolled and left to relax, then folded back and bonded to the deck in sections, with trapped air pressed out for a flat, tight finish.

  4. Trims, Upstands and Final Review

    Edge trims are fixed and upstands sealed at walls and roof lights. We clear the offcuts, then review the completed roof with you and confirm everything has been done as agreed.

Get a Free Quote 020 8419 8580

FAQs

Frequently Asked Questions

Can you repair my existing EPDM roof rather than replace it?

Usually, yes. Punctures, small tears and lifted edges can be repaired with a compatible rubber patch and adhesive, as long as the membrane around the damage is clean and sound. We check the rest of the roof on the same visit.

Why does the deck matter so much with EPDM?

The membrane is bonded directly to the deck, so any rot, damp or loose boards underneath will show through or weaken the bond. We replace damaged boards and make sure the surface is clean and dry before the rubber goes down.

Do you fit EPDM on commercial buildings in WD6?

Yes. Wide EPDM sheets suit larger commercial flat roofs because they cut down the number of seams across the area. We plan access with you to keep disruption to your business low.

Do I need to contact Hertsmere Borough Council before re-roofing?

Replacing a flat roof covering is generally treated as maintenance. Listed buildings and homes in conservation areas can be different, so check with Hertsmere Borough Council if either applies.

Still Have a Question?

If your question is not answered here, get in touch and we will discuss it with you.

Call us020 8419 8580Email usinfo@tnrroofingcompany.co.uk
Get in touch

Areas we cover

EPDM Rubber Roofing across Hertfordshire

Alongside Borehamwood, we carry out EPDM rubber roofing in these towns:

Covering Borehamwood and Hertfordshire

EPDM Rubber Roofing across Borehamwood and the rest of Hertfordshire. Call to arrange a free survey and a quote.

Call 020 8419 8580
Call 020 8419 8580Get a Free Quote